服务器维护,服务器代维,安全设置,漏洞扫描,入侵检测服务

运维之家

 找回密码
 注册
搜索
查看: 6732|回复: 0

pgpool-II主备流复制的架设

[复制链接]
dirtysea 发表于 2018-12-18 17:15:38 | 显示全部楼层 |阅读模式

1.环境

1
2
3
4
5
OS:  CentOS release 6.4 (Final)
DB: postgresql 9.3.6
pgpool服务器: pgpool 172.16.0.240
数据库主服务器:master 172.16.0.241
数据库从服务器:slave  172.16.0.242 

其中主从数据库使用的流复制,并且已经配置完毕,新配置的pgpool使用postgres用户进行管理。新架构使用的主备模式外加流复制,此架构支持流复制、负载均衡、故障恢复,不支持复制和并行查询,主库可以支持读写,从库只读。

2.pgpool安装

1
2
3
4
5
6
7
[root@pgpool opt]# yum install -y http://yum.postgresql.org/9.3/redhat/rhel-6-x86_64/pgdg-redhat93-9.3-1.noarch.rpm
[root@pgpool opt]# yum install postgresql93-devel
[root@pgpool opt]# wget http://www.pgpool.net/download.php?f=pgpool-II-3.4.2.tar.gz
[root@pgpool opt]# mv download.php\?f\=pgpool-II-3.4.2.tar.gz pgpool-II-3.4.2.tar.gz
[root@pgpool opt]# tar -zxvf pgpool-II-3.4.2.tar.gz
[root@pgpool opt]# cd pgpool-II-3.4.2
[root@pgpool pgpool-II-3.4.2]# ./configure --with-pgsql=/usr/pgsql-9.3

如果不加--with-pgsql=/usr/pgsql-9.3,可能会出现configure: error: libpq is not installed or libpq is old错误

1
2
[root@pgpool pgpool-II-3.4.2]# make
[root@pgpool pgpool-II-3.4.2]# make install

3.修改pgpool配置

启用并修改配置文件pgpool.conf

1
[root@pgpool etc]# cp /usr/local/etc/pgpool.conf.sample-stream /usr/local/etc/pgpool.conf

修改pgpool.conf文件中的内容

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
# - pgpool Communication Manager Connection Settings -
listen_addresses = '*'
 
---默认0是主库,其它是从库,backend_weight可以控制数据库读在两台机器上的分配比例
 
# - Backend Connection Settings -
backend_hostname0 = '172.16.0.241'
backend_port0 = 5432
backend_weight0 = 1
backend_data_directory0 = '/var/lib/pgsql/9.3/data'
backend_flag0 = 'ALLOW_TO_FAILOVER'
 
backend_hostname1 = '172.16.0.242'
backend_port1 = 5432
backend_weight1 = 1
backend_data_directory1 = '/data1'
backend_flag1 = 'ALLOW_TO_FAILOVER'
backend_data_directory0 = '/var/lib/pgsql/9.3/data'
 
# - Authentication -
 
---开启pgpool的hba认证
 
enable_pool_hba = on
#------------------------------------------------------------------------------
# MASTER/SLAVE MODE
#------------------------------------------------------------------------------
sr_check_user = 'postgres'
sr_check_password = '123456'
 
#------------------------------------------------------------------------------
# HEALTH CHECK
#------------------------------------------------------------------------------
 
health_check_period = 1
health_check_user = 'postgres'
health_check_password = '123456'
 
#------------------------------------------------------------------------------
# FAILOVER AND FAILBACK
#------------------------------------------------------------------------------
 
---用来在主库失败时,把只读的从库切为主库
 
failover_command = '/usr/local/bin/failover_stream.sh %d %H /tmp/trigger_file0'

启用并修改配置文件pcp.conf

1
[root@pgpool etc]# cp /usr/local/etc/pcp.conf.sample /usr/local/etc/pcp.conf

此文件是管理端口,可以暂时不用配置。

启用并修改配置文件pool_hba.conf

1
2
3
4
5
[root@pgpool etc]# cp /usr/local/etc/pool_hba.conf.sample /usr/local/etc/pool_hba.conf
---添加一行:
host    all         all         172.16.0.0/24   md5
---删除一行
host    all         all         127.0.0.1/32          trust

对pgpool的访问策略,要设置为md5的方式。

启用配置文件pool_passwd

1
2
[root@pgpool etc]# pg_md5 -m -p -u postgres pool_passwd
password:

密码填的是123456,该文件会在执行文件后自动生成。从远程连接pgpool的时候,需要使用该密码来访问,pgpool使用该用户密码来访问后面的真正的数据库。

添加主备脚本切换脚本failover_stream.sh

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
[root@pgpool bin]# vi /usr/local/bin/failover_stream.sh
# Failover command for streaming replication.
# This script assumes that DB node 0 is primary, and 1 is standby.
#
# If standby goes down, do nothing. If primary goes down, create a
# trigger file so that standby takes over primary node.
#
# Arguments: $1: failed node id. $2: new master hostname. $3: path to
# trigger file.
 
failed_node=$1
new_master=$2
trigger_file=$3
 
# Do nothing if standby goes down.
if [ $failed_node = 1 ]; then
        exit 0;
fi
 
# Create the trigger file.
/usr/bin/ssh -T $new_master /bin/touch $trigger_file
 
exit 0;
 
[root@pgpool bin]# chmod 700 failover_stream.sh

对应的从库slave的recovery.conf配置:

1
2
3
4
[root@slave data]# cat recovery.conf
standby_mode = 'on'
primary_conninfo = 'host=172.16.0.241 port=5432 user=rep_user'
trigger_file = '/tmp/trigger_file0'

该trigger_file的参数要和pgpool.conf文件中failover_command对应的文件保持一致。

4.设置主机互信

修改hosts文件

对每个主机的/etc/hosts文件添加以下内容,

1
2
3
172.16.0.240 pgpool
172.16.0.241 master
172.16.0.242 slave

pgpool主机生成公钥和私钥

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
[root@pgpool bin]# su - postgres
-bash-4.1$ ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/var/lib/pgsql/.ssh/id_rsa):
Created directory '/var/lib/pgsql/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /var/lib/pgsql/.ssh/id_rsa.
Your public key has been saved in /var/lib/pgsql/.ssh/id_rsa.pub.
The key fingerprint is:
a0:93:d4:b5:ed:26:d0:94:a5:e7:99:95:6b:d6:18:af postgres@pgpool
The key's randomart image is:
+--[ RSA 2048]----+
|        oo.      |
|     . +.+   .   |
|    . + + o +    |
|   . o o + + *   |
|    +   S * = o  |
|     .   o o .   |
|            E    |
|                 |
|                 |
+-----------------+

输入命令后一直回车即可。在master和slave节点同样执行上面的操作。

同步公钥

在pgpool节点上执行

1
2
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.241
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.242

在master节点上执行

1
2
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.241
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.242 

在slave节点上执行

1
2
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.241
-bash-4.1$ ssh-copy-id -i ~/.ssh/id_rsa.pub postgres@172.16.0.242

  

上面的操作执行后,在每个机器检查一下,是否可以用ssh username@nodename的方式,对其他节点进行免密码的ssh访问,第一次访问的时候会记录known_hosts,否则ssh时候会有是否信任节点的提示。

5.启动pgpool

使用postgres用户启动pgpool服务的话,需要修改对应目录的权限,否则pgpool会启动失败

1
2
3
4
[root@pgpool etc]# mkdir /var/run/pgpool
[root@pgpool run]# chown -R postgres:postgres /var/run/pgpool
[root@pgpool local]# chown -R postgres:postgres /usr/local/etc
[root@pgpool local]# chown -R postgres:postgres /usr/local/bin

  

检验主从数据库切换的脚本是否可以正常运行,在pgpool服务器执行命令,检测在slave服务器是否生成了trigger_file0文件

shell脚本在pgpool执行

1
-bash-4.1$ /usr/local/bin/failover_stream.sh 0 slave /tmp/trigger_file0

切换到slave主机检查

1
2
[root@slave ~]# ls /tmp
ssh-rangWC1783  trigger_file0  yum.log 

启动pgpool

1
2
-bash-4.1$ pgpool -n -d > /tmp/pgpool.log 2>&1 &
[1] 10474  

6.检测pgpool功能

任一节点(如slave节点)连接pgpool

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
[root@slave ~]# psql -h 172.16.0.240 -p 9999 -d test -U postgres
Password for user postgres:
psql (9.3.6)
Type "help" for help.
 
test=# select from t4;
 id
----
  1
(1 row)
 
test=# show pool_nodes;
 node_id |   hostname   | port | status | lb_weight |  role  
---------+--------------+------+--------+-----------+---------
 0       | 172.16.0.241 | 5432 | 2      | 0.500000  | primary
 1       | 172.16.0.242 | 5432 | 2      | 0.500000  | standby
(2 rows)

可以看到此时241数据库是主节点,242是从节点。

关闭主要节点,可以关闭服务也可以直接杀进程模拟数据库崩溃

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
[root@master data]# service postgresql-9.3 stop
Stopping postgresql-9.3 service: [  OK  ]
  
---master关闭后,从节点的连接中断后又成功连接上
 
server closed the connection unexpectedly
        This probably means the server terminated abnormally
        before or while processing the request.
The connection to the server was lost. Attempting reset: Succeeded.
test=# show pool_nodes;
 node_id |   hostname   | port | status | lb_weight |  role  
---------+--------------+------+--------+-----------+---------
 0       | 172.16.0.241 | 5432 | 3      | 0.500000  | standby
 1       | 172.16.0.242 | 5432 | 2      | 0.500000  | primary
 
test=# insert into t4 values (6);
INSERT 0 1
test=# select from t4;
 id
----
  1
  6
(2 rows)
 
test=#  

pgpool发生主从切换后,242节点变为主节点,241节点关闭(status为3)。

上面查询show pool_nodes中得status字段含义

1
2
3
4
5
Status 由数字 [0 - 3]来表示。
0 - 该状态仅仅用于初始化,PCP从不显示它。
1 - 节点已启动,还没有连接。
2 - 节点已启动,连接被缓冲。
3 - 节点已关闭。

可以看到主备已经切换完成。

7.其它注意事项

  • 若pgpool上的主从切换脚本忘记写,或者没能正常执行,show pool_nodes命令会显示两个节点都是standby,而集群整体是只读的,此时可以关闭并启动节点的数据库服务,然后重启pgpool。
  • 测试trigger文件的时候,注意要及时删除生成的trigger 文件,否则会破坏主从架构,导致后面的实验失败。

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|小黑屋|手机版|Archiver|运维之家

GMT+8, 2024-3-29 17:54 , Processed in 0.206412 second(s), 14 queries .

Powered by Dirtysea

© 2008-2020 Dirtysea.com.

快速回复 返回顶部 返回列表