安装ClipBucket环境
官网 http://clip-bucket.com/开源下载：http://sourceforge.net/projects/clipbucket/安装一款国外的开源视频分享网站，类似于国内的土豆，优酷等，每个人都可以上传分享视频的开源软件
有中文版的哦，下面就来说说怎么样安装ClipBucket环境
预览图
http://bbs.ywlm.net/data/attachment/forum/201202/10/143349vxzr9sxshvgqqiiz.png.thumb.jpg 2012-2-10 14:33:49 上传
下载附件 (270.8 KB)
一，安装依赖环境：
[*]yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers vixie-cron crontabs net-snmp tcpdump unzip autoconf kernel-devel wget ntp
复制代码
建立用户和目录
useradd -s /sbin/nologin mysql
useradd -s /sbin/nologin www
mkdir -p /usr/local/lnmp
mkdir -p /data/wwwroot
mkdir -p /data/mysql
mkdir -p /data/wwwroot/logs
mkdir -p /data/wwwroot/www
chmod +w /data/wwwroot/logs
chown -R www:www /data/wwwroot
二，安装PHP：
[*]wget http://nginx.org/download/nginx-1.0.6.tar.gzwget http://cn2.php.net/get/php-5.2.17.tar.gz/from/this/mirrorwget ftp://ftp.ntu.edu.tw/pub/MySQL/Downloads/MySQL-5.1/mysql-5.1.58.tar.gzwget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.13.1.tar.gzwget http://nchc.dl.sourceforge.net/project/mhash/mhash/0.9.9.9/mhash-0.9.9.9.tar.gzwget http://nchc.dl.sourceforge.net/project/mcrypt/MCrypt/2.6.8/mcrypt-2.6.8.tar.gzwget http://nchc.dl.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gzwget http://pecl.php.net/get/memcache-2.2.6.tgzwget http://nchc.dl.sourceforge.net/project/pcre/pcre/8.12/pcre-8.12.tar.gzwget http://nchc.dl.sourceforge.net/project/eaccelerator/eaccelerator/eAccelerator%200.9.6.1/eaccelerator-0.9.6.1.tar.bz2wget ftp://ftp.imagemagick.org/pub/ImageMagick/ImageMagick.tar.gzwget http://pecl.php.net/get/imagick-2.3.0.tgzwget http://pecl.php.net/get/PDO_MYSQL-1.0.2.tgzwget http://php-fpm.org/downloads/php-5.2.17-fpm-0.5.14.diff.gz
复制代码
tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install
cd ../
tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../
2，安装数据库
tar -zxvf mysql-5.1.58.tar.gz
cd mysql-5.1.58/
./configure --prefix=/usr/local/lnmp/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make && make install
cd ../
配置数据库
vi /etc/my.cnf
输入：
[*]
[*]default-character-set = utf8
[*]port = 3306
[*]socket = /tmp/mysql.sock
[*]
[*]
[*]no-auto-rehash
[*]
[*]
[*]default-character-set = utf8
[*]user = mysql
[*]port = 3306
[*]socket = /tmp/mysql.sock
[*]basedir = /usr/local/lnmp/mysql
[*]datadir = /data/mysql/data
[*]open_files_limit = 10240
[*]back_log = 600
[*]max_connections = 3000
[*]max_connect_errors = 6000
[*]table_cache = 614
[*]external-locking = FALSE
[*]max_allowed_packet = 32M
[*]sort_buffer_size = 2M
[*]join_buffer_size = 2M
[*]thread_cache_size = 300
[*]thread_concurrency = 8
[*]query_cache_size = 32M
[*]query_cache_limit = 2M
[*]query_cache_min_res_unit = 2k
[*]default-storage-engine = MyISAM
[*]default_table_type = MyISAM
[*]thread_stack = 192K
[*]transaction_isolation = READ-COMMITTED
[*]tmp_table_size = 246M
[*]max_heap_table_size = 246M
[*]long_query_time = 1
[*]log_long_format
[*]log-bin = /data/mysql/binlog
[*]binlog_cache_size = 4M
[*]binlog_format = MIXED
[*]max_binlog_cache_size = 8M
[*]max_binlog_size = 512M
[*]expire_logs_days = 7
[*]key_buffer_size = 256M
[*]read_buffer_size = 1M
[*]read_rnd_buffer_size = 16M
[*]bulk_insert_buffer_size = 64M
[*]myisam_sort_buffer_size = 128M
[*]myisam_max_sort_file_size = 10G
[*]myisam_max_extra_sort_file_size = 10G
[*]myisam_repair_threads = 1
[*]myisam_recover
[*]
[*]skip-name-resolve
[*]master-connect-retry = 10
[*]slave-skip-errors = 1032,1062,126,1114,1146,1048,1396
[*]
[*]server-id = 1
[*]
[*]innodb_additional_mem_pool_size = 16M
[*]innodb_buffer_pool_size = 64M
[*]innodb_data_file_path = ibdata1:1024M:autoextend
[*]innodb_file_io_threads = 4
[*]innodb_thread_concurrency = 8
[*]innodb_flush_log_at_trx_commit = 2
[*]innodb_log_buffer_size = 16M
[*]innodb_log_file_size = 128M
[*]innodb_log_files_in_group = 3
[*]innodb_max_dirty_pages_pct = 90
[*]innodb_lock_wait_timeout = 120
[*]innodb_file_per_table = 0
[*]
[*]quick
[*]max_allowed_packet = 32M
复制代码
chmod +w /usr/local/lnmp/mysql/
chown -R mysql:mysql /usr/local/lnmp/mysql/
chown -R mysql:mysql /data/mysql
/usr/local/lnmp/mysql/bin/mysql_install_db --basedir=/usr/local/lnmp/mysql/ --datadir=/data/mysql/data --user=mysql
添加数据库为系统服务：
cp /usr/local/lnmp/mysql/share/mysql/mysql.server /etc/init.d/mysql
[*]cat >> /etc/ld.so.conf.d/mysql.conf<<EOF
[*]/usr/local/lnmp/mysql/lib/mysql
[*]/usr/local/lib
[*]EOF
[*]ldconfig
复制代码
ln -s /usr/local/lnmp/mysql/lib/mysql /usr/lib/mysql
ln -s /usr/local/lnmp/mysql/include/mysql /usr/include/mysql
ln -s /usr/local/lnmp/mysql/bin/mysql /usr/bin/mysql
ln -s /usr/local/lnmp/mysql/bin/mysqldump /usr/bin/mysqldump
ln -s /usr/local/lnmp/mysql/bin/myisamchk /usr/bin/myisamchk
chmod 755 /etc/init.d/mysql
chkconfig --add mysql
chkconfig --level 35 mysql on
启动数据库：
service mysql start
配置数据库root密码：
/usr/local/lnmp/mysql/bin/mysqladmin -u root -h 127.0.0.1 password
数据库安装完毕
3，安装PHP
ln -s /usr/local/lnmp/mysql/bin/mysql_config /usr/bin/mysql_config
tar zxvf php-5.2.17.tar.gz
gzip -cd php-5.2.17-fpm-0.5.14.diff.gz | patch -d php-5.2.17 -p1
cd php-5.2.17/
./configure --prefix=/usr/local/lnmp/php --with-config-file-path=/usr/local/lnmp/php/etc --with-mysql=/usr/local/lnmp/mysql --with-mysqli=/usr/local/lnmp/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/lnmp/php/etc/php.ini
安装PHP扩展组件
cd $src_dir
tar zxvf memcache-2.2.6.tgz
cd memcache-2.2.6/
/usr/local/lnmp/php/bin/phpize
./configure --with-php-config=/usr/local/lnmp/php/bin/php-config
make
make install
cd ../
tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/lnmp/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/lnmp/php/bin/php-config
make
make install
cd ../
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.7.2-3/
./configure
make
make install
cd ../
tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/lnmp/php/bin/phpize
./configure --with-php-config=/usr/local/lnmp/php/bin/php-config
make
make install
cd ../
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/ulllsr/local/lnmp/php/bin/phpize
./configure --with-php-config=/usr/local/lnmp/php/bin/php-config --with-pdo-mysql=/usr/local/lnmp/mysql
make
make install
cd ../
配置PHP加载扩展
sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/lnmp/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/lnmp/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/lnmp/php/etc/php.ini
sed -i "s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g" /usr/local/lnmp/php/etc/php.ini
sed -i "s#; cgi.fix_pathinfo=0#cgi.fix_pathinfo=0#g" /usr/local/lnmp/php/etc/php.ini
sed -i 's/short_open_tag = Off/short_open_tag = On/g' /usr/local/lnmp/php/etc/php.ini
sed -i 's/;date.timezone =/date.timezone = PRC/g' /usr/local/lnmp/php/etc/php.ini
sed -i 's/post_max_size = 8M/post_max_size = 50M/g' /usr/local/lnmp/php/etc/php.ini
sed -i 's/upload_max_filesize = 2M/upload_max_filesize = 50M/g' /usr/local/lnmp/php/etc/php.ini
sed -i 's/max_execution_time = 30/max_execution_time = 300/g' /usr/local/lnmp/php/etc/php.ini
mkdir -p /usr/local/lnmp/eaccelerator_cache
rm -rf /usr/local/lnmp/php/etc/php-fpm.conf
vi /usr/local/lnmp/php/etc/php-fpm.conf
输入：
[*]<?xml version="1.0" ?>
[*]<configuration>
[*]
[*]All relative paths in this config are relative to php's install prefix
[*]
[*]<section name="global_options">
[*]
[*] Pid file
[*] <value name="pid_file">/usr/local/lnmp/php/logs/php-fpm.pid</value>
[*]
[*] Error log file
[*] <value name="error_log">/usr/local/lnmp/php/logs/php-fpm.log</value>
[*]
[*] Log level
[*] <value name="log_level">notice</value>
[*]
[*] When this amount of php processes exited with SIGSEGV or SIGBUS ...
[*] <value name="emergency_restart_threshold">10</value>
[*]
[*] ... in a less than this interval of time, a graceful restart will be initiated.
[*] Useful to work around accidental curruptions in accelerator's shared memory.
[*] <value name="emergency_restart_interval">1m</value>
[*]
[*] Time limit on waiting child's reaction on signals from master
[*] <value name="process_control_timeout">5s</value>
[*]
[*] Set to 'no' to debug fpm
[*] <value name="daemonize">yes</value>
[*]
[*]</section>
[*]
[*]<workers>
[*]
[*] <section name="pool">
[*]
[*] Name of pool. Used in logs and stats.
[*] <value name="name">default</value>
[*]
[*] Address to accept fastcgi requests on.
[*] Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
[*] <value name="listen_address">127.0.0.1:9000</value>
[*]
[*] <value name="listen_options">
[*]
[*] Set listen(2) backlog
[*] <value name="backlog">-1</value>
[*]
[*] Set permissions for unix socket, if one used.
[*] In Linux read/write permissions must be set in order to allow connections from web server.
[*] Many BSD-derrived systems allow connections regardless of permissions.
[*] <value name="owner"></value>
[*] <value name="group"></value>
[*]
[*] <value name="mode">0666</value>
[*] </value>
[*]
[*] Additional php.ini defines, specific to this pool of workers.
[*] <value name="php_defines">
[*] <value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
[*] <value name="display_errors">0</value>
[*] </value>
[*]
[*] Unix user of processes
[*] <value name="user">www</value>
[*]
[*] Unix group of processes
[*] <value name="group">www</value>
[*]
[*] Process manager settings
[*] <value name="pm">
[*]
[*] Sets style of controling worker process count.
[*] Valid values are 'static' and 'apache-like'
[*] <value name="style">static</value>
[*]
[*] Sets the limit on the number of simultaneous requests that will be served.
[*] Equivalent to Apache MaxClients directive.
[*] Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
[*] Used with any pm_style.
[*] <value name="max_children">128</value>
[*]
[*] Settings group for 'apache-like' pm style
[*] <value name="apache_like">
[*]
[*] Sets the number of server processes created on startup.
[*] Used only when 'apache-like' pm_style is selected
[*] <value name="StartServers">20</value>
[*]
[*] Sets the desired minimum number of idle server processes.
[*] Used only when 'apache-like' pm_style is selected
[*] <value name="MinSpareServers">5</value>
[*]
[*] Sets the desired maximum number of idle server processes.
[*] Used only when 'apache-like' pm_style is selected
[*] <value name="MaxSpareServers">35</value>
[*]
[*] </value>
[*]
[*] </value>
[*]
[*] The timeout (in seconds) for serving a single request after which the worker process will be terminated
[*] Should be used when 'max_execution_time' ini option does not stop script execution for some reason
[*] '0s' means 'off'
[*]
[*] <value name="request_terminate_timeout">0s</value>
[*]
[*] The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
[*] '0s' means 'off'
[*] <value name="request_slowlog_timeout">0s</value>
[*]
[*] The log file for slow requests
[*] <value name="slowlog">logs/slow.log</value>
[*]
[*] Set open file desc rlimit
[*] <value name="rlimit_files">65535</value>
[*]
[*] Set max core size rlimit
[*] <value name="rlimit_core">0</value>
[*]
[*] Chroot to this directory at the start, absolute path
[*] <value name="chroot"></value>
[*]
[*] Chdir to this directory at the start, absolute path
[*] <value name="chdir"></value>
[*]
[*] Redirect workers' stdout and stderr into main error log.
[*] If not set, they will be redirected to /dev/null, according to FastCGI specs
[*] <value name="catch_workers_output">yes</value>
[*]
[*] How much requests each process should execute before respawn.
[*] Useful to work around memory leaks in 3rd party libraries.
[*] For endless request processing please specify 0
[*] Equivalent to PHP_FCGI_MAX_REQUESTS
[*] <value name="max_requests">1024</value>
[*]
[*] Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
[*] Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
[*] Makes sense only with AF_INET listening socket.
[*] <value name="allowed_clients">127.0.0.1</value>
[*]
[*] Pass environment variables like LD_LIBRARY_PATH
[*] All $VARIABLEs are taken from current environment
[*] <value name="environment">
[*] <value name="HOSTNAME">$HOSTNAME</value>
[*] <value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
[*] <value name="TMP">/tmp</value>
[*] <value name="TMPDIR">/tmp</value>
[*] <value name="TEMP">/tmp</value>
[*] <value name="OSTYPE">$OSTYPE</value>
[*] <value name="MACHTYPE">$MACHTYPE</value>
[*] <value name="MALLOC_CHECK_">2</value>
[*] </value>
[*]
[*] </section>
[*]
[*]</workers>
[*]
[*]</configuration>
复制代码
配置eaccelerator：
cat >>/usr/local/lnmp/php/etc/php.ini<<EOF
zend_extension="/usr/local/lnmp/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/lnmp/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
zend_optimizer.optimization_level=1
zend_extension="/usr/local/lnmp/zend/ZendOptimizer.so"
EOF
启动PHP：/usr/local/lnmp/php/sbin/php-fpm
PHP安装完毕
三，安装nginx
tar zxvf pcre-8.12.tar.gz
cd pcre-8.12/
./configure
make && make install
cd ..
tar zxvf nginx-1.0.6.tar.gz
cd nginx-1.0.6/
./configure --user=www --group=www --prefix=/usr/local/lnmp/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_gzip_static_module --with-ipv6
make && make install
cd ../
配置nginx：
rm -f /usr/local/lnmp/nginx/conf/nginx.conf
cat > /usr/local/lnmp/nginx/conf/fcgi.conf<<EOF
if (\$request_filename ~* (.*)\.php) {
set \$php_url \$1;
}
if (!-e \$php_url.php) {
return 403;
}
fastcgi_paramGATEWAY_INTERFACECGI/1.1;
fastcgi_paramSERVER_SOFTWARE nginx;
fastcgi_paramQUERY_STRING \$query_string;
fastcgi_paramREQUEST_METHOD \$request_method;
fastcgi_paramCONTENT_TYPE \$content_type;
fastcgi_paramCONTENT_LENGTH \$content_length;
fastcgi_paramSCRIPT_FILENAME \$document_root\$fastcgi_script_name;
fastcgi_paramSCRIPT_NAME \$fastcgi_script_name;
fastcgi_paramREQUEST_URI \$request_uri;
fastcgi_paramDOCUMENT_URI \$document_uri;
fastcgi_paramDOCUMENT_ROOT \$document_root;
fastcgi_paramSERVER_PROTOCOL \$server_protocol;
fastcgi_paramREMOTE_ADDR \$remote_addr;
fastcgi_paramREMOTE_PORT \$remote_port;
fastcgi_paramSERVER_ADDR \$server_addr;
fastcgi_paramSERVER_PORT \$server_port;
fastcgi_paramSERVER_NAME \$server_name;
#PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_paramREDIRECT_STATUS 200;
EOF
配置：nginx
vi /usr/local/lnmp/nginx/conf/nginx.conf
输入：
[*]userwww www;worker_processes 8;error_log/data/wwwroot/logs/nginx_error.logcrit;pid /usr/local/lnmp/nginx/logs/nginx.pid;#Specifies the value for maximum file descriptors that can be opened by this process.worker_rlimit_nofile 65535;events{use epoll;worker_connections 65535;}
[*]http { include mime.types; default_typeapplication/octet-stream;
[*] server_names_hash_bucket_size 128; client_header_buffer_size 32k; large_client_header_buffers 4 32k; client_max_body_size 50m;
[*] sendfile on; tcp_nopush on;
[*] keepalive_timeout 60;
[*] tcp_nodelay on;
[*] fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 256k;
[*] gzip on; gzip_min_length1k; gzip_buffers 4 16k; gzip_http_version 1.0; gzip_comp_level 2; gzip_types text/plain application/x-javascript text/css application/xml; gzip_vary on;
[*] #limit_zonecrawler$binary_remote_addr10m;
[*]server{ listen 80; server_namewww.ywlm.net; index index.html index.htm index.php; root/data/wwwroot/www; #limit_conn crawler20;
[*] location ~ .*\.(php|php5)?[ DISCUZ_CODE_952 ]nbsp; { #fastcgi_passunix:/tmp/php-cgi.sock; fastcgi_pass127.0.0.1:9000; fastcgi_index index.php; include fcgi.conf; }
[*] location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)[ DISCUZ_CODE_952 ]nbsp; { expires 30d; } location ~ .*\.(js|css)?[ DISCUZ_CODE_952 ]nbsp; { expires 1h; } access_logoff; }server{ listen80; server_namestatus.ywlm.net; location / { stub_status on; access_log off; }}}
复制代码
启动nginx：/usr/local/lnmp/nginx/sbin/nginx
基本环节全部安装完毕，下面是安装ClipBucket部分
四，安装ClipBucket
到官方网站下载程序：http://clip-bucket.com/
http://bbs.ywlm.net/data/attachment/forum/201202/10/141823u7xstpmwpp7p2ant.png.thumb.jpg 2012-2-10 14:18:23 上传
下载附件 (130.11 KB)
上传：ClipBucket中upload到/data/wwwroot/www目录
在浏览器上输入http://ip/cb_install
即可得到安装界面，根据提示一步一步安装，如图：
第一步：创建数据库cb：
http://bbs.ywlm.net/data/attachment/forum/201202/10/1421228fpknc98ckuc6l9z.png.thumb.jpg 2012-2-10 14:21:22 上传
下载附件 (22.42 KB)
第二不：输入：http://yourip/cb_install
**到安装界面
http://bbs.ywlm.net/data/attachment/forum/201202/10/142557l9r5a02fakkzqn19.png.thumb.jpg 2012-2-10 14:25:57 上传
下载附件 (62.38 KB)
检查环境
http://bbs.ywlm.net/data/attachment/forum/201202/10/14255879axhzrhixzi1uha.png.thumb.jpg 2012-2-10 14:25:58 上传
下载附件 (41.21 KB)
检查目录是否可写，如果有提示为红色的，这吧目录权限设置为777
http://bbs.ywlm.net/data/attachment/forum/201202/10/142558ut7am7jfx7xfauxa.png.thumb.jpg 2012-2-10 14:25:58 上传
下载附件 (59.07 KB)
设置管理员密码，默认是admin
http://bbs.ywlm.net/data/attachment/forum/201202/10/142559136jbcx89l7lg077.png.thumb.jpg 2012-2-10 14:25:59 上传
下载附件 (39.83 KB)
http://bbs.ywlm.net/data/attachment/forum/201202/10/142559lqi5v1qb57m5ntp3.png.thumb.jpg 2012-2-10 14:25:59 上传
下载附件 (39.67 KB)
连接数据库设置
http://bbs.ywlm.net/data/attachment/forum/201202/10/142559n345f8fg53524rvr.png.thumb.jpg 2012-2-10 14:25:59 上传
下载附件 (45.94 KB)
安装完成，要求删除安装目录，安装提示做即可
http://bbs.ywlm.net/data/attachment/forum/201202/10/142600kppwvbtkkybp754w.png.thumb.jpg 2012-2-10 14:26:00 上传
下载附件 (65.89 KB)
注意，如果提示下面错误，这可安装二楼去做即可
PrecheckingClipbucket requires following modules in order to work properly, we are performing some initial search to find modules. Click here for why we need these modules
[*]PHPFound PHP 5.2.17
[*]FFMPEGUnable to find ffmpeg
[*]FLVtool2Unable to find flvtool2
[*]MP4BoxUnable to find MP4Box
[*]cURLcURL 7.15.5 found
[*]PHPShieldPHPShield loaders are not installed (optional)
复制代码
http://bbs.ywlm.net/data/attachment/forum/201202/10/1052182pv7o85ho8pvohi5.png.thumb.jpg 2012-2-10 10:52:17 上传
下载附件 (40.47 KB)
安装完成后预览图： http://bbs.ywlm.net/data/attachment/forum/201202/10/143612e7ejzews6yqekzyj.png.thumb.jpg 2012-2-10 14:36:12 上传
下载附件 (270.8 KB)
是不是很酷？
------------------------------------------------------------------------------------------------------------------------------------------------------------下面是解决一些依赖问题
来源：http://bbs.ywlm.net/thread-1141-1-1.html php扩展模块ffmpeg-php安装
译安装ffmpeg非常的麻烦，还好我们找到了一个yum源可以方便的安装ffmpeg以及ffmpeg-dev，下面是步骤：
(1)
vi /etc/yum.repos.d/dag.repo
输入：
make: *** Error 1
则：
[*]mv ffmpeg_frame.loT ffmpeg_frame.lo
复制代码
如果启动php的时候如果有ffmepg-php模块错误提示：
[*]php: symbol lookup error: /usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/ffmpeg.so: undefined symbol: register_ffmpeg_frame_class
复制代码
则执行：
[*]nm /usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/ffmpeg.so | grep register_ffmpeg_frame_class
复制代码
若执行结果输出
[*]U register_ffmpeg_frame_class
复制代码
则修改ffmpeg_frame.c,将3处的PIX_FMT_RGBA32 更改为PIX_FMT_RGB32即可。
vi ffmpeg_frame.c
[*]:%s/PIX_FMT_RGBA32/PIX_FMT_RGB32
复制代码
[*]:wq!
复制代码
继续安装
[*]./configure --with-php-config=/usr/local/webserver/php/bin/php-config
[*]make test
[*]make
[*]make install
复制代码
编写测试代码vi test.php
[*]<?php
[*]$mov= new ffmpeg_movie('./12.rmvb');
[*]$ff_frame = $mov->getFrame(120);
[*]$gd_image = $ff_frame->toGDImage();
[*]$img=$_SERVER['DOCUMENT_ROOT']."/test.jpg";//要生成图片的绝对路径
[*]imagejpeg($gd_image, $img);//创建jpg图像
[*]imagedestroy($gd_image);//销毁一图像?>
复制代码
显示效果：http://bbs.ywlm.net/data/attachment/forum/201202/10/110641fm0sehzkidpbbiim.jpg.thumb.jpg 2012-2-10 11:06:41 上传
下载附件 (109.56 KB)
安装flvtool2
[*]yum install ruby
[*]wget http://rubyforge.org/frs/download.php/17497/flvtool2-1.0.6.tgz
[*]tar zxvf flvtool2-1.0.6.tgz
[*]cd flvtool2_1.0.6/
[*]ruby setup.rb config
[*]ruby setup.rb setup
[*]ruby setup.rb install
复制代码
官方地址：
http://rubyforge.org
mp4box 安装
安装必要组件：
/usr/bin/ld: skipping incompatible /usr/lib/libGL.so when searching for -lGL/usr/bin/ld: cannot find -lGLcollect2: ld returned 1 exit statusmake: *** Error 1make: Leaving directory `/root/gpac/src’make: *** Error 2
原因是mesa-libGL-devel这个包可能不完整，直接使用yum -y install mesa-libGL-devel命令把这个包安装一下，然后在make的时候就正常了。
安装完成后发现还是无法进行视频转换，进后台看发现：
http://bbs.ywlm.net/data/attachment/forum/201202/10/124344f3f8einirgrnnrg3.png.thumb.jpg 2012-2-10 12:43:44 上传
下载附件 (180.05 KB)
后台路径设置一下即可：
php
/usr/local/lnmp/php/bin/php
flvtool2
/usr/bin/flvtool2
ffmpeg
/usr/bin/ffmpeg
PHPSHIELD的安装
首先去首页http://www.phpshield.com/loaders/找到对应的
如图：
http://bbs.ywlm.net/data/attachment/forum/201202/10/12452311xco11ufj00hift.png.thumb.jpg 2012-2-10 12:45:23 上传
下载附件 (123.55 KB)
Linux：选择红框所注：
下载解压后出现下面文件：
http://bbs.ywlm.net/data/attachment/forum/201202/10/124704v396pvv6jtjmv3jp.png.thumb.jpg 2012-2-10 12:47:04 上传
下载附件 (46.34 KB)
选择ixed.5.2.lin，上传到服务器/usr/local/lnmp/php/lib/php/extensions/no-debug-non-zts-20060613/目录下
这个目录根据你的实际情况来定
然后修改php.ini文件
[*]extension_dir = "/usr/local/lnmp/php/lib/php/extensions/no-debug-non-zts-20060613/"
[*]extension = "memcache.so"
[*]extension = "pdo_mysql.so"
[*]extension = "imagick.so"
[*]extension = "ffmpeg.so"
[*]extension = "ixed.5.2.lin"
复制代码
看到extension = "ixed.5.2.lin"了吧，然后重启php即可！
注意，这里ixed.5.2中的5.2和你用的PHP版本要对应着呢
页:
[1]