主机监控：nagios安装配置
安装 nagios之前的准备设置IP地址。关闭SELinux
设置时间，保持跟本地时间一致!
# yum -y install gcc glibc glibc-common gd gd-devel openssl-devel
必须安装gd-devel， 安装nagios时需要加--with-gd-lib=/usr/lib --with-gd-inc=/usr/include
不然不能生成statusmap.cgi也就不能看状态图了！
添加用户，建立安装目录
# groupadd nagios
# useradd -g nagios -d /usr/local/nagios -s /sbin/nologin nagios
# usermod -G nagios apache
# grep ^User /etc/httpd/conf/httpd.conf
User apache
#usermod -G nagios apache
1.Nagios监控linux服务器平台及所用组件,
监控服务器:CentOS 5.3x64(192.168.1.202)+nagios-3.2.1+ nagios-plugins-1.4.15+ nrpe_2.8.1
被监控端： CentOS 5.3x64(192.168.1.203)+ nagios-plugins-1.4.15+ nrpe_2.8.1
注意：两端nrpe的版本要一致，不然无法相连接
NRPE总共由两部分组成: check_nrpe插件,运行在监控主机上。 NRPE daemon,运行在远程的linux主机上(通常就是被监控机)
2.配置监控端
安装nagios
cd nagios-3.2.1
./configure --prefix=/usr/local/nagios --with-command-group=nagcmd --with-gd-lib=/usr/lib --with-gd-inc=/usr/include
make all
make install
make install-init
make install-config
make install-commandmode
make install-webconf
#可以自动配置httpd.conf
安装nagios-plugins
cd nagios-plugins-1.4.15
./configure --with-nagios-user=nagios --with-nagios-group=nagios --enable-redhat-pthread-workaround
make
make install
安装NRPE
#yum install openssl-devel （安装 openssl包）
cd nagios-nrpe_2.8.1
./configure
#默认自动添加了openssl
#因为传送过程要加密,如果后面make报错,加如下参数
rpm -qa| grep ssl
openssl-devel-0.9.7a-43.17.el4_6.1
rpm -ql openssl-devel-0.9.7a-43.17.el4_6.1 | more
./configure --enable-ssl --with-ssl-lib=/lib/(当然前提要有openssl)
make all
make install-plugin
commands.cfg定义外部构件nrpe
vi /usr/local/nagios/etc/objects/commands.cfg
#添加
#check nrpe
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
配置要监控的linux主机
vi /usr/local/nagios/etc/nagios.cfg
#中间添加
cfg_file=/usr/local/nagios/etc/objects/mylinux.cfg
新建mylinux.cfg 设置监控内容
vi /usr/local/nagios/etc/objects/mylinux.cfg
define host{
use
linux-server
host_name mylinux
alias
mylinux
address 192.168.1.203(客户端IP既被监控的IP)
}
define service{
use
generic-service
host_name
mylinux
service_description check-swap
check_command
check_nrpe!check_swap
}
define service{
use
generic-service
host_name
mylinux
service_description check-load
check_command check_nrpe!check_load
}
define service{
use
generic-service
host_name
mylinux
service_description
check-disk
check_command check_nrpe!check_had1
}
define service{
use
generic-service
host_name
mylinux
service_description
check-users
check_command
check_nrpe!check_users
}
define service{
use
generic-service
host_name
mylinux
service_descriptionotal_procs
check_command check_nrpe!check_total_procs
}
#这5个是默认的监控服务，如需自定义服务可在这里添加
自定义服务可参考：http://saplingidea.javaeye.com/blog/514013
如有必要则需更改check阈值，在被监控端的/usr/local/nagios/etc/nrpe.cfg，下面会提到
其它设置
chkconfig --add nagios
#配置机器启动时自动启动Nagios
chkconfig nagios on
/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
#检查Nagios配置文件
vi /etc/selinux/config
#关闭SELinux
SELINUX=disabled
service iptables stop
#关闭SELinux,或打开80,5666端口
service nagios start
2.配置被监控端1.安装nagios-plugin
useradd nagios
passwd nagios
tar -zxvf nagios-plugins-1.4.15.tar.gz
cd nagios-plugins-1.4.15
./configure --with-nagios-user=nagios --with-nagios-group=nagios --enable-redhat-pthread-workaround
Make
make install
改变主目录权限
chown –R
nagios.nagios /usr/local/nagios
# ll
drwxr-xr-x
2 nagios nagios 4096 Jun
1 00:07 libexec
drwxr-xr-x
3 nagios nagios 4096 Jun
1 00:07 share
安装客户端的nrpe
yum install openssl-devel （安装 openssl包）
tar -zxvf nagios-nrpe_2.8.1.orig.tar.gz
cd nagios-nrpe_2.8.1
./configure
(会自动加载SSL)
#如果后面make报错,加如下参数
./configure --enable-ssl --with-ssl-lib=/usr/lib/(当然前提要有openssl)
make all
make install-plugin
make install-daemon
make install-daemon-config
配置nrpe信息
vi /usr/local/nagios/etc/nrpe.cfg
allowed_hosts=127.0.0.1,192.168.1.202
启动nrpe
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg –d
#上面这一步在本机上可以运行，如通过ssh连接，则需用：/usr/local/nagios/bin/nrpe -d
vi /etc/rc.d/rc.local
/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg –d
验证nrpe
netstat -an | grep 5666
tcp
0
0 0.0.0.0:5666
0.0.0.0:*
LISTEN
/usr/local/nagios/libexec/check_nrpe -H 127.0.0.1
NRPE v2.8.1
#服务端测试
/usr/local/nagios/libexec/check_nrpe -H l92.168.1.203
NRPE v2.8.1
#常见错误
/usr/local/nagios/libexec/check_nrpe -H 127.0.0.1
CHECK_NRPE: Error - Could not complete SSL handshake.
配置allowed_hosts=127.0.0.1,192.168.1.202然后kill进程再重启就OK了
2./usr/local/nagios/libexec/check_nrpe -H 127.0.0.1
Connection refused by host
Nrpe进程没有启动
配置监控对像(关键)
由监控原理可知被监控端做监控然后传给监控服务器绘总,设置监控详细参数主要是设置被监控端的nrpe.cfg文件
可以看到里面监控对象
vi /usr/local/nagios/etc/nrpe.cfg
command=/usr/local/nagios/libexec/check_users -w 5 -c 10
command=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
command=/usr/local/nagios/libexec/check_disk -w 20 -c 10 -p /dev/hda1
command=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
command=/usr/local/nagios/libexec/check_procs -w 150 -c 200
command=/usr/local/nagios/libexec/check_swap -w 20% -c 10%
#这里就是上面提到的check阈值，如需更改，加减后面的数值即可
放一个我做的图，这里监控了两个主机，方法同上
下一章讲nagios各个模块的作用和通知
http://img74.ph.126.net/nuMcXv1YjzPpn7FVa1MBzA==/851743279528478547.jpg
来源：http://blog.163.com/qingfeng_0105@126/blog/static/75062738201093095021704/
Nagios飞信linux短信报警脚本配置
1.编写发送脚本
vi sendsms.sh
#!/bin/bash
fetionDir=/usr/local/fetion/
cd $fetionDir
DIR=`pwd`
user=13724506486
pwd=gjb88888
for phone in `cat $DIR/phonelist.txt`
do
echo "$phone" | sed ‘/^[ \t]*$/d’ | sed ‘s/^[ \t]*//’ | sed ‘s/[ \t]*$//’ | grep ‘^1‘
if (($? == 0 ));then
if [[ -f $DIR/msg.txt ]];then
echo "================" >> msg.txt
fi
phone=`echo "$phone" | sed ‘s/^[ \t]*//’ | sed ‘s/[ \t]*$//’`
echo "sms $phone $1" >> $DIR/msg.txt
echo "quit" >> $DIR/msg.txt
$fetionDir/fetion –mobile=$user –pwd=$pwd –to=$phone –msg-utf8="$1"
else
continue
fi
done
2.接收者电话号码
vi /usr/local/fetion/phonelist.txt
#hugwww
13724506486
3.修改飞信目录权限（否则运行Nagios的用户不能写入信息内容到/usr/local/fetion/msg.txt）
chown -R nagios.nagios /usr/local/fetion
chmod +x /usr/local/fetion/sendsms.sh
4.配置Nagios
vi commands.cfg
###################################################################
#
# notify-host-by-sendmsg/notify-service-by-sendmsg//定义发送飞信报警的命令
#
###################################################################
define command {
command_namenotify-host-by-fetion
command_line/usr/local/fetion/sendsms.sh "Host $HOSTSTATE$ alert for $HOSTNAME$($HOSTADDRESS$) on $TIME$."
}
define command {
command_namenotify-service-by-fetion
command_line/usr/local/fetion/sendsms.sh ""$TIME$":$SERVICEDESC$($HOSTADDRESS$) is $SERVICESTATE$."
}
5.定义联系人
vi contacts.cfg
define contact {
contact_name admin
alias system admin
host_notification_period 24×7
service_notification_period 24×7
host_notification_options d,r
service_notification_options w,u,c,r
service_notification_commands notify-service-by-email,notify-service-by-fetion
host_notification_commands notify-host-by-email,notify-host-by-fetion
email hugwww@115.com
pager 13724506486
}
测试故障时是否能够触发短信报警
/usr/local/fetion/sendsms.sh "nagios Host alert"
完成！ nagios+LAMP自动安装脚本#!/bin/sh
# Nagios V3.03 install script
# Write by zhengyp
#Date:2008-10-8
# Softwares are all store in /usr/local/src
cd /usr/local/src
#Install LAMP for Nagios
# Step 1. Install Apache
tar zxvf httpd-2.2.9.tar.gz
cd httpd-2.2.9
./configure --prefix=/usr/local/apache --enable-so --enable-mods-shared=all
make && make install
#Configure the apache server for PHP
sed -i 's#DirectoryIndex index.html#& index.php#' /usr/local/apache/conf/http.conf
sed -i '/AddType application\/x-gzip .gz .tgz/i\AddType application/x-httpd-php .php\
AddType application/x-httpd-php-source .phps' /usr/local/apache/conf/http.conf
#Step 2. Install Mysql As a server
#Add a mysql user
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
cd ..
tar zxvf mysql-5.1.26-rc.tar.gz
cd mysql-5.1.26-rc/
./configure --prefix=/usr/local/mysql/ --without-debug --with-unix-socket-path=/usr/local/mysql/mysql.sock --with-client-ldflags=-all-static --with-mysqld-ldflags=-all-static --enable-assembler --with-extra-charsets=gbk,gb2312,utf8 --with-pthread --enable-thread-safe-client
make && make install
chmod +w /usr/local/mysql
chown -R mysql:mysql /usr/local/mysql
cp support-files/my-medium.cnf /usr/local/mysql/my.cnf
cd ../
#Initialize the database
#You can change the data directory by set "--datadir="
#mkdir /data
#chown -R mysql:mysql /data
/usr/local/mysql/bin/mysql_install_db --defaults-file=/usr/local/mysql/my.cnf --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --user=mysql --pid-file=/usr/local/mysql/mysql.pid --skip-locking --port=3306 --socket=/tmp/mysql.sock
#Start Mysql
/bin/sh /usr/local/mysql/bin/mysqld_safe --defaults-file=/usr/local/mysql/my.cnf &
#Step 3. Install PHP
#If you use CentOS, Please run yum to check that the graphics library have installed.Also it will update for these softwares
#If you use Redhat , Install the graphics library by "rpm" command
cd ..
yum -y install gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libpng libpng-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc- devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel
tar zxvf php-5.2.6.tar.gz
cd php-5.2.6
./configure --prefix=/usr/local/php5 --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-apxs2=/usr/local/apache/bin/apxs --with-freetype --with-jpeg --with-png --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --with-curl --with-curlwrappers --with-gd --enable-gd-native-ttf --with-openssl
make && make install
cd ..
#Step 4.Install Nagios 3.03
#Add nagios user
adduser nagios
mkdir /usr/local/nagios
chown nagios:nagios /usr/local/nagios
groupadd nagcmd
usermod -G nagcmd nagios
tar zxvf nagios-3.0.3.tar.gz
cd nagios-3.0.3
sed -i 's#wav#x-mplayer2#' cgi/status.c
#Configure and make
./configure --prefix=/usr/local/nagios --with-command-group=nagcmd --with-httpd-conf=/usr/local/apache/conf/httpd.conf --with-gd
make all
make install
make install-init
make install-config
make install-commandmode
#Add a user for nagios ,You can change the passwd for the user you add
/usr/local/apache/bin/htpasswd -c /usr/local/nagios/etc/htpasswd nagios <<EOF
123
123
EOF
sed -i '/AddType application\/x-gzip .gz .tgz/i\AddType application/x-httpd-php .php\
AddType application/x-httpd-php-source .phps' /usr/local/apache/conf/http.conf
sed -i '/<\/IfModule>/a\Alias /nagios/cgi-bin/images/ "/usr/local/nagios/share/images/"\
<Directory "/usr/local/nagios/share/images/">\
AllowOverride None\
Options None\
Order allow,deny\
Allow from all\
AuthType Basic\
AuthName "Login User"\
AuthUserFile /usr/local/nagios/etc/htpasswd\
require user nagios\
</Directory>\
ScriptAlias /nagios/cgi-bin/ "/usr/local/nagios/sbin/"\
<Directory "/usr/local/nagios/sbin/">\
AllowOverride None\
Options None\
Order allow,deny\
Allow from all\
AuthType Basic\
AuthName "Login User"\
AuthUserFile /usr/local/nagios/etc/htpasswd\
require user nagios\
</Directory>\
Alias /nagios/ "/usr/local/nagios/share/"\
<Directory "/usr/local/nagios/share/">\
AllowOverride None\
Options None\
Order allow,deny\
Allow from all\
AuthType Basic\
AuthName "Login User"\
AuthUserFile /usr/local/nagios/etc/htpasswd\
require user nagios\
</Directory>' /usr/local/apache/conf/http.conf
sed -i 's#ServerName www.temple.com:80#ServerName 127.0.0.1#' /usr/local/apache/conf/http.conf
/usr/local/apache/bin/apachectl start
#Step 5. Install Naigos plugins
#Install plugins
cd /usr/local/src
tar xvzf nagios-plugins-1.4.12.tar.gz
cd nagios-plugins-1.4.11
./configure --prefix=/usr/local/nagios --with-nagios-user=nagios --with-nagios-group=nagios --enable-redhat-pthread-workaround --with-nagios-user=nagios --with-mysql=/usr/local/mysql
make && make install
# Install nrpe
cd /usr/local/src
tar zxvf nrpe-2.12.tar.gz
cd nrpe-2.12
./configure --enable-ssl --with-ssl-lib=/usr/local/nagios/openssl/lib --with-kerberos-inc=/usr/local/nagios/openssl/include --enable-command-args
make;make install
make install-plugin
make install-daemon
make install-daemon-config
chown nagios:nagios /usr/local/nagios/etc/nrpe.cfg
sed 's#dont_blame_nrpe=0#dont_blame_nrpe=1#' /usr/local/nagios/etc/nrpe.cfg
#Add nrpe to service
echo "nrpe 5666/tcp # NRPE" >>/etc/service
echo " " > /etc/xinetd.d/nrpe
sed -i '/ /i\service nrpe\
{\
disable = no\
flags = REUSE\
socket_type = stream\
wait = no\
user = nagios\
server = /usr/local/nagios/bin/nrpe\
server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd\
log_on_failure += USERID\
only_from = 192.168.0.200 #nagiosServer IP\
}' /etc/xinetd.d/nrpe
#Step 6. Configure Naigos
#Add the user who you've create in step 4 by htpasswd for nagios
cd /usr/local/nagios/etc
sed -i 's#default_user_name=guest#default_user_name=nagios' cgi.cfg
sed -i 's#=nagiosadmin#=nagiosadmin,nagios' cgi.cfg
#Start nagios
/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg
service nagios start
#Step 7 . Set all servers start after system boot
echo "/usr/local/nagios/bin/nagios -d /usr/local/nagios/etc/nagios.cfg" >> /etc/rc.local
echo "service nagios start" >> /etc/rc.local
echo "/bin/sh /usr/local/mysql/bin/mysqld_safe --defaults-file=/usr/local/mysql/my.cnf &" >> /etc/rc.local
echo "/usr/local/apache/bin/apache/bin/apachectl start" >> /etc/rc.local
配置 Nagios 使用 FetionRobot 短信报警<BR><BR><STRONG>一、概述<BR><BR></STRONG> Nagios 是 Linux 环境下使用率最高的监控软件，它善于监控服务，容易进行二次定制。<BR> <A href="http://www.it-adv.net/" target=_blank>Feition Robot</A> 是一款基于移动飞信服务的类 Unix 实现。通过 FetionRobot 可以很方便的在 shell 下发送免费短信。<BR> 本文介绍介绍了如何通过 FetionRobot 使得 Nagios 可以免费发送报警短信。<BR><BR> 平台：CentOS 5.2 x86_64<BR><BR><STRONG>二、Fetion Robot</STRONG><BR><BR> 写此文时，使用的 fetion 软件版本为：fetion20080910047-lin64.tar.gz md5sum：9265d8f57556672220ee6a22c77c65af。使用的支持库 library64_linux.tar.gz md5sum 为：2e858e9184c4761bb0d1f9cea14dc49e 。<BR><BR> <STRONG>安装 Fetion Robot</STRONG><BR><BR> 下载 Fetion Robot 以及依赖库。
<DIV class=blockcode>
<DIV id=code0>http://www.it-adv.net/fetion/download/fetion20080910047-lin64.tar.gz<BR>http://www.it-adv.net/fetion/library64_linux.tar.gz</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>解压缩 library64_linux.tar.gz 内库文件至
<DIV class=blockcode>
<DIV id=code1>/usr/lib64</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>。完成后记得执行一下
<DIV class=blockcode>
<DIV id=code2>ldconfig</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>刷新一下。<BR><BR> 解压缩 fetion20080910047-lin64.tar.gz 得到二进制文件。直接运行 fetion 即可：<BR><BR>
<DIV class=quote>
<BLOCKQUOTE># ./fetion -h<BR>************************ IMPORTANT STATEMENT ************************<BR>** **<BR>** PLEASE DON'T USE THIS SOFTWARE TO SEND JUNK SHORT MESSAGES. **<BR>** OTHERWISE PLEASE BEAR YOUR OWN CONSEQUENCES. **<BR>** **<BR>** Version: **<BR>*********************************************************************<BR>This program is the console version of China Fetion!<BR>It's free for personal user.<BR>Fetion official website: <A href="http://www.fetion.com.cn/" target=_blank>http://www.fetion.com.cn/</A><BR>This project website: <A href="http://www.it-adv.net/" target=_blank>http://www.it-adv.net/</A><BR><BR>AUTHOR:KelvinH MSN/EMAIL:shichangguo@msn.com<BR><BR>Usage:<BR> fetion -h<BR> -h: help<BR> fetion -u mobile -p pwd [-b batchfile] [-EN] [-d]<BR> fetion -c -id [-EN] [-d]<BR> -u: Fetion user account(only supports mobile phone No.)<BR> -p: Account password<BR> -b: Batch file name<BR> -d: Debug on and write logs to -debug.log<BR> -c: config file name, refer to fetion.conf<BR> -i: id, refer to fetion.conf<BR> -EN: English<BR>#</BLOCKQUOTE></DIV><BR><BR> 关于 fetionrobot 命令行更具体的使用，<A href="http://www.hiadmin.com/%E7%B3%BB%E7%BB%9F%E7%9B%91%E6%8E%A7%EF%BC%9Alinux%E5%91%BD%E4%BB%A4%E8%A1%8C-%E9%A3%9E%E4%BF%A1%E5%AE%A2%E6%88%B7%E7%AB%AF%E5%8F%91%E9%80%81%E5%85%8D%E8%B4%B9%E6%8A%A5%E8%AD%A6%E7%9F%AD%E4%BF%A1/" target=_blank>请参考此文</A>。这里不再重复。<BR><BR> <STRONG>可能出现的问题</STRONG><BR><BR> 在 64 位系统下会出现 libstdc++ 包版本过低的问题。具体表现为：
<DIV class=blockcode>
<DIV id=code3># fetion -h<BR>fetion: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /usr/lib64/libACE.so.5.4.7)</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>出现此问题，是由于 gcc 的版本太低，同时导致 libstdc++ 库版本过低。CentOS 5.2 使用 libstdc++-4.1.2-42.el5 版本。而通过 <A href="http://rpm.pbone.net/index.php3/stat/4/idpl/8080422/com/libstdc++-4.1.2-42.el5.x86_64.rpm.html" target=_blank>rpm 查询</A> 可以看到，此版本最高只提供了 GLIBCXX_3.4.8 。<BR><BR> 如果你有足够的时间，可以自己编译高版本的 gcc。并且在运行 fetion 时指定 lib 地址。<BR> 另外你还可以找一个 <A href="http://rpm.pbone.net/index.php3/stat/4/idpl/7223657/com/libstdc++-4.3.0-8.x86_64.rpm.html" target=_blank>Fedora Core 9 中的 libstdc++</A> 。它包含了所需要的库。
<DIV class=blockcode>
<DIV id=code4># rpm -Uvh --force libstdc++-4.3.0-8.x86_64.rpm<BR>warning: libstdc++-4.3.0-8.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2<BR>Preparing... ########################################### <BR> 1:libstdc++ ########################################### </DIV><FONT color=#336699 size=2>复制代码</FONT></DIV><STRONG>三、perl 脚本准备 </STRONG><BR><BR> 此脚本从 <A href="http://www.leletv.net/discuz/viewthread.php?tid=1046&extra=&page=1" target=_blank>论坛上这篇文章</A> 修改而来。稍微做了一点加工。<BR><BR> 脚本的作用是将 nagios 中的报警信息以及要通知的**号码格式化的输入到其他文本中。这里的“格式化”是符合 fetion 脚本模式的格式化。在输出完成后，调用 fetion 去依照文本发短信。<BR><BR> 我修改的内容是让脚本支持一次通知多个**。
<DIV class=blockcode>
<DIV id=code5>#!/usr/bin/perl<BR>use strict;<BR>use Fcntl qw(:flock);<BR>open SMS, "]/tmp/sms.txt" or die "NO OK";<BR>flock(SMS,LOCK_EX);<BR>my @mobile = split /\s+/, $ARGV;<BR>foreach (@mobile) {<BR>print SMS "sms $_ $ARGV\n";<BR>}<BR>print SMS "quit\n";<BR>system "/usr/bin/fetion -u 136xxxxxx -p xxxxxxxx -b /tmp/sms.txt";<BR>#unlink "/home/sms/sms.txt";<BR>flock(SMS,LOCK_UN);<BR>close SMS;<BR><BR>#unlink "/home/sms/sms.txt";</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>推荐将此脚本放在
<DIV class=blockcode>
<DIV id=code6>nagios/libexec/</DIV><FONT color=#336699 size=2>复制代码</FONT></DIV>下。<BR>记得在 /tmp 下创建 sms.txt 文件，777。<BR><BR><STRONG>四、Nagios 配置</STRONG><BR><BR> nagios 配置2个点：<BR><BR> 1.定义短信提醒方式。调用前面写的 perl 脚本。同时将报警信息和**号码传入脚本。<BR> 2.定义管理员接受报警方式。<BR><BR>直接贴配置文件了：<BR><BR>定义短信提醒调用脚本<BR><BR> define command {<BR> command_name host-notify-by-sms<BR> command_line /usr/local/nagios/libexec/sms "IP: $HOSTADDRESS$($HOSTNAME$) is $HOSTSTATE$\n$SHORTDATETIME$" "$CONTACTPAGER$"<BR> }<BR><BR> define command {<BR> command_name service-notify-by-sms<BR> command_line /usr/local/nagios/libexec/sms "'$HOSTADDRESS$' $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$" "$CONTACTPAGER$"<BR> }<BR><BR> 定义管理员接受报警方式<BR><BR> define contact{<BR> contact_name nagiosadmin ; Short name of user<BR> use generic-contact ; Inherit default values from generic-contact template (defined above)<BR> alias Nagios Admin ; Full name of user<BR> service_notification_commands notify-service-by-email,service-notify-by-sms<BR> host_notification_commands notify-host-by-email,host-notify-by-sms<BR> email youremailaddress;<BR> pager 136xxxxxxx 136xxxxxx<BR> }<BR>
页:
[1]